How to install windows 10 easily on your PC

How you can easily install Windows10 OS
What are the System requirements for running Windows 10 If Windows 8 works fine on the PC then Windows 10 also should.
The system requirements for Windows 10 are:
Processor: 1 gigahertz (GHz) or faster RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64- bit)
Free hard disk space: 16 GB
Graphics card: Microsoft DirectX 9 graphics device with WDDM driver A Microsoft account and Internet access
You may ask yourself What do I need to do before upgrading to Windows 10?
Firstly,
Ensure to backup your important stuff (that’s if you choose to format).
If you don’t format then the files from your previous installation will be saved to C:/Windows.old Be sure that your PC’s manufacturer has essential Windows 8/10-ocompatible drivers (e.g graphics, sound, wireless etc)
Windows 10 installation media. You can create one by downloading the ISO at HERE The PC connected to a power source (to avoid a power failure during installation)
How do I install Windows 10?
1. Insert / connect the installation media then shutdown the PC
2. Power up the PC and keep tapping Esc or F9 to enter the boot options menu
3. Select the storage media from the list and Windows should start loading
4. Select your Language to install, Time and currency format & Keyboard or input layout then click Next
5. Click Install now
6. Tick “I accept the licence terms” and click Next
7. Select “Custom: Install Windows only (advanced)”
8. Highlight the partition you wish to install Windows 10 to and click Next (click Format if you wish to format it first).
9. Wait while the files get prepared for installation
10. Wait while updates get installed
11. The PC will restart
12. Wait while Windows loads (the PC may restart several times so exercise some patience)
13. Click “Use Express settings”
14. Wait while installation continues
15. Wait while the PC gets setup
16. Wait while critical updates get installed
17. The PC might restart again
18. Highlight “Join a domain” and click Next
19. Supply your preferred PC name, password and hint (incase you forget your password) then click Next
20. Wait while the PC gets setup
21. Wait while the apps get setup
22. Select “Yes” to make the PC discoverable by other PCs
23. Congratulations! Windows 10 has been successfully installed

How to fix unfortunately, the process com.android.phone has stopped on an MTK Phones

Possible causes of this error are:
1. Corrupted or missing Phone.apk
2. A crash in Phone.apk while  attempting to display caller ID and other information.

How to fix
Method 1: Ultimate Caller ID Screen HD


Download and install Ultimate Caller ID Screen HD HERE

Method 2: Clear Phone data and cache

* Navigate to Settings > Apps > All > Phone
* Clear data and cache
* Reboot the phone

Method 3: Replace Phone.apk

Download the Stock ROM HERE and flash only
system.img (Android) using SP flash tool.

Download SP Flash Tool HERE

Drop your comment if you have any question or getting any error  in any of the methods.

How to solve "No internet access" and "Limited" on PC when connected to a hotspot

If you’re a PC user who has upgraded to Windows 8.1 recently, you may have noticed an error when connected to a wireless network. The issue arises when the connection is described as either “Limited” or “No Internet Access” under the network settings icon listed on the taskbar. Fortunately, troubleshooting this error is a relatively simple task, assuming the problem is software-related and not due to a faulty wireless card.

If you’re personally encountering an issue like this with your Internet connection on Windows 8.1, there’s no need to worry. With the help of this guide, we’ll have you back on theweb in no time!

Reset the network adapter

First things first. It’s suggested that before trying anything else, you’ll want to reset your network adapter, the physical component inside your computer that allows for wireless connectivity with a network. To reset the adapter, navigate with your cursor to the upper right-hand corner of your screen, move the mouse down, and select Search from the charms menu. In the search bar, type in Network and Sharing Center and click on the first result.

Consequently, a control panel window will open up and you’ll be faced with a number of options. The only one you’ll have to worry about, however, is Change adapter settingson the left side of the screen. Click on that to find yourself redirected to a list of Internet connections, one of which should indicate a Wi-Fi network. Right-click on the Wi-Fi connection and select Disable. After that, you’ll want to select Enable in order to completely reset the wireless adapter.

 

After resetting the adapter, your next step is to verify the success of the procedure. The easiest way to accomplish this would be to open a new window in any given web browser, such as Internet Explorer or Google Chrome, and type in the web address of any site you frequent. For me, I entered Google.com, which led me to a familiar search screen, but virtually anything will suffice.

If the browser fails to display the desired webpage, return to the Network Connections window exemplified above and right-click the icon denoting your wireless adapter once again. This time, select Diagnose. This will trigger a diagnostic which will attempt to identify the cause of the network interruption.

In the likely event that Windows Network Diagnostics is unable to determine the root of the issue, you will encounter a screen which reads: Troubleshooting couldn’t identify the problem. You can try exploring other options that might be helpful. By other options, it’s referring to the alternative routes that have been conveniently listed for you under the subheading below.

Rollback the drivers

If troubleshooting your network adapter doesn’t solve the problem, overwriting the drivers installed by Microsoft with the original Manufacturers Drivers probably will. In this case, move your cursor to the upper right-hand corner of the screen, drag it down, and select Search again. This time you’ll want to search for Device Manager. Type this in and a new window will open up. In the Device Manager window, double-click Network adapters to prompt a drop-down menu. From that point, right-click the the network adapter that you’re having trouble with and select Update Driver Software.

 

Subsequently, yet another window will pop up asking how you want to search for driver software. Don’t opt to search for it automatically. Instead, choose Browse my computer for driver software, followed by Let me pick from a list of device drivers on my computer. This should result in a list of two options: 1) a driver from the manufacturer of the network adapter, such as Intel or Qualcomm Atheros and 2) a driver from Microsoft. In the example below, there are two Manufacturers Drivers listed, but that shouldn’t be the case for you unless you’ve chosen to manually install additional drivers at some point in your computing career.

Moving forward, you’ll want to select the Manufacturers Driver, depicted below as the Intel Centrino Wireless-N 2230. The driver software will be installed succeeded by a confirmation message. After completing the installation, you’ll want to restart your computer and ensure that the issue has been resolved. If not, there’s yet another method to pursue.

 

Disable TCP settings in command prompt

Now this solution may seem a little more complicated, but like the other aforementioned methods provided above, it’s actually quite simple. First, you’ll want to open Command Prompt with administrative privileges. To do this, move your cursor to the upper right-hand corner of the screen, drag it down, and select Search. This time you’ll want to type Command Prompt in the search bar and right-click the first result. Then select Run as administrator. User Account Control will then inquire about making changes to your computer. You’ll want to respond by saying Yes.

Command Prompt will greet you in a new Window. At this point, you’ll be required to type in a few commands, pressing the enter key after each one.

The commands are as follows:

• int tcp set heuristics disabled
• int tcp set global autotuninlevel=disabled
• netsch int tcp set global rss=enabled
•   
  
  
  The result should look exactly like the image I’ve provided above. To confirm that the TCP settings have successfully been disabled, type the command netsh int tcp show globaland hit enter again. The window should then appear just as mine did in the screenshot below. Everything should be disabled except Receive-Side Scaling State. After the TCP settings have been verified, you should restart your computer.

Its no use! — Remaining solutions

If none of these solutions worked in your favor, both Microsoft andDell have allocated resources specifically to interrupted Wi-Fi connections encountered by Windows 8.1 users. Additionally, there are a number of online forums, such as the official Microsoft Community, network dedicated entirely to helping PC users just like you with troubleshooting technical issues. If you have any questions about the information I’ve provided in this article, I encourage you to leave all related inquiries in the comments section below. I’ll do my best to find an answer even if I don’t have the solution immediately at my disposal.

Thanks for reading!

How To Stop Automatic Update On Your Windows 10 PC

Are you running on the latest Windows 10 PC and you suffer from Auto update without your permission? Though its good in other way round if you have the data cos you will be updated with the latest features and updates. But there are people who doesn't like the feature.

We know its easy to disable the auto update feature in the older version of Windows which you can see in the Control Panel, but in Windows 10 Pc the place to turn off Automatic update is quite hard. Not to worry, i will teach you how to turn off automatic update on your Windows 10 PC.

HOW TO TURN OFF AUTOMATIC UPDATE ON WINDOWS 10 PC

1.) Search for services.msc in Cortana/Searchbox and open it by pressing ENTER.


2.) Scroll down the list and find Windows Update and Double Click it.

3.) On the General tab, go to Startup type and select ‘Disabled’.


4) Click Apply and Ok.

After following my above steps, you will stop getting Automatic updates on your windows 10 pc. You can Enable it by following the same steps but choose Automatic in the options and click on Apply and Ok.

Now you are safe from unknown data loss and save data for something else.
Kindly share this post using the share button below cos someone might be needing this.

How To Run Android Apps On Your PC

Today Android is by far the best mobile operating system as it comes with a lot of amazing games and applications. Sometimes, we want to play that andriod game or apps on our PC but some of these apps and games which are available at Google Play Market are not available for Windows and Mac operating systems. So, what should one do??

Today, in this tutorial I'm going to tell you how you can Run Android games and applications on PC. All you will need is a software which is known as Bluestacks.

Bluestacks in an Android emulatorwhich will help us to Run Android games and applications on PC. You can have the perfect Android experience on your Windows and Mac Operating system using Bluestacks

How to Install Bluestacks.

Step 1: First of all you need to download Bluestacks. Click Here to downlod bluestack for your windows, or MAC OS.

Step 2: Once downloaded, install it using the executable file.  You will see a couple of steps in the installation wizard. Follow these steps and installation will be continued.
Once the installation is done, Bluestacks icon will be available on your desktop.


Once you have downloaded and installed Bluestacks, the next thing you need to do is open Bluestacks and follow the steps mentioned below:-

Step 1: When you run the Bluestacks for the first time you will be asked to insert your Google Account details. Insert the Google Account details so that the account can be synced with Google Play market.

Step 2: Once your account is synced then you are ready to go. Open the home of Bluestacks by clicking on Bluestacks icon and you will see a search field there. Type the name of app or game there.
Let me explain this to you with the help of an example:- In the Search field enter “Whats App” (without quotes).
You will see What’s App on the homepage and will also see an Install Button present there. Click on Install button and the app will start downloading. The download time will take long depending on your internet’s speed.


Step 3: Now open the app. When you  open the app for the first time you will be asked to enter your mobile number.  Provide the correct mobile number as this number will get a verification code which will be used to authenticate your Whatapp account.  Now you have verified the account you can easily use Whatsapp from your computer.
If you want to see which applications are installed on your system, you can open the “My Apps” area and see all the apps which are present on your system. Open the “Top Charts” section to see the apps which are being most downloaded by people on the Google Play market. You can even sync apps from your PC to your Android smartphone or from your Android smartphone to your PC using Cloud Connect.

How To Download And Use Whatsapp On PC And MAC

A lot of improvements has been done on WhatsApp lately and of such improvement is the availability of WhatsApp for Mac and PC users. No need to go through any third party application again like Bluestack or even visit whatsapp web. Now you can have the .exe set up on your desktop. Its official!

It offers you native desktop notifications, better keyboard shortcuts, and  lots more.
The app is available for Windows 8+ and Mac OS 10.9 and higher.

Where Can I Download it?
Download it Here (62mb)
Install and run it,
Scan the QR code using the WhatsApp app on your phone and you are good to go.

Whatsapp is gradually taking over